Ask Aaron Q/A: Proraso Shaving Cream: Tub vs Tube
Aaron is asked a question from a DE newbie about Proraso shaving cream and whether it’s better to store the cream in it’s original tube or a tub
Oliver Kenny, from the UK, asks:
“Hi, I am fairly new to shaving cream. I’ve been using an old safety razor I got from my Grandfather but I’ve just been using ordinary shaving gel with it. But now I bought a tube of Proraso from you. I have used a fair amount of it but was told putting it in a tub would make lathering easier. Would you recommend putting it in a tub? Another problem I have is that a barber friend gave me a 500ml tube as a birthday present along with an alum block and some razors. I am worried this is going to go out of date and hard before I use all of it and would putting it in a tub make that worse? As you can probably tell I am new to this whole DE safety razor game, and any advice would be hugely appreciated. Thanks, Oliver Kenny.”
Proraso Shaving Cream Tube (150ml)
AARON SAYS
“Mr Kenny,
If it were me, I would keep the Proraso cream in the original tube. It’s designed to be there and will retain it’s original composition that way, if you were t put it into a pot or tub, unless it was very air tight, it would begin to dry out. Now having it dry out on you would not affect the effectiveness of the product, just make it a little harder to use and lose some of it’s scent. All you need is about an almond sized squirt of cream to whip into some great lather. I have seen pictures of that 500ml tube, and it would take you years to finish it off! It should keep for quite a long time sealed in the pouch. I wouldn’t open it unless you plan on using the large tube or splitting it with some friends. As long as it stays air tight afterwords, it should keep well for quite some time! Enjoy it, Proraso is a great product!
Happy Shaving!
Aaron”
Do you have any burning questions you would like ask our wet shaving expert Aaron Wolfenbarger?
CLICK HERE TO ASK AARON YOUR QUESTION
Ask Aaron Q/A: I’m struggling to get a decent shave from a DE razor – What am I doing wrong?
Aaron is asked a question from a DE newbie who is struggling to get a decent shave with his Edwin Jagger safety razor
Brendan Nichols, from the UK, asks:
“I’ve just bought my first DE saftey razor (EJ CHATSWOTH) and I have also invested in a Kent BK12 shaving brush to compliment it. I’ve been using my new razor now for 3 days but can’t seem to get a close shave like I did with a Mach 3 razor? I’m using feather blades with the razor but still can’t get a close shave (FEEL LIKE AN ELECTRIC SHAVE) and find myself going over the same parts 3 or 4 times, which for me is not good as I have very sensitive skin. As a result of this my skin has become blotchy and I’m already contemplating on giving up with DE shaving and going back to a Mach 3? I use good quality shaving cream (Geo f trumper) so I know its not this. I’m not sure if it’s just me being new to DE shaving and not getting my razor angle right? Not sure what to do I have spent a lot of money on my new razor but also dont want to irritate my skin any more. Do u have any suggestions please?”
AARON SAYS
“Mr Nichols,
Well this is definitely not the start we want you to have to traditional shaving! You definitely have fine equipment to work with and I do not see that as a problem.
Try going back to the basics and making sure your technique is where it’s supposed to be. Are you creating a good thick lather that looks like meringue, is your razor angle around 30 degrees, lock your wrist and make the shaving motions with your arm, little to no pressure and other pieces of technique.
I also would consider switching the blade, Feathers can be harsh to a beginner and Derby’s, Astras, Personnas or Wilkinson-Sword blades may work better. Another thought, make sure the secondary plate (the one the blade rests on) isn’t upside down. It’s easy to do, even sometimes the more experienced ones of us (including myself here) have been known to do so.
Please reply back and let us know if this helps! We will do what we can to make sure your shaving experience is a smooth one!
Cheers,
Aaron”
Do you have any burning questions you would like ask our wet shaving expert Aaron Wolfenbarger?
CLICK HERE TO ASK AARON YOUR QUESTION
Ask Aaron Q/A: Straight razor maintenance – Honing & Stropping
Aaron is asked a question about honing and stropping a straight/cut throat razor
James Allen, from the UK, asks:
“Hi, my face is on fire and I have about 5 cuts as well. I am new to shaving with a straight razor and have tried to hone and strop the blade myself. I used a 800 grit stone, then onto an 8000+ slate stone, then strop. The blade will pop hairs from my arm but when I try to shave with it, it just isn’t sharp enough. Please tell me where I’m going wrong? (had to abandon my shave 3/4′s of the way through to) very painfull.”
Honing and sharpening your own straight razor is a fine art
AARON SAYS
“Mr. Allen,
Honing and sharpening your own straight razor is a fine art. From what I have read, you need even finer grit honing stones to continue your process.
I definitely recommend taking your razor to your local barber, or finding a honing specialist in the UK through one of the many online shaving forums (straightrazorplace.com, badgerandblade.com, and shavenook.com are the most popular). Many gentlemen there will be able to hone your razor, and give you tips and tricks on how to learn to hone it yourself.
Also you can find great information on stropping your blade (rolling the edges will defeat all your honing work!) and shaving technique. Good luck with your new shaving venture, and I wish you the very best!
Happy Shaving,
Aaron”
Do you have any burning questions you would like ask our wet shaving expert Aaron Wolfenbarger?
CLICK HERE TO ASK AARON YOUR QUESTION
Ask Aaron Q/A: Sore skin & small blood spots on chin & neck after shaving
Aaron is asked a question about sore skin & small blood spots on chin and neck after shaving
Andrew James, from the UK, asks:
“Hi there, new to double edge shaving from 18 years of cartridge shaving. Using Merkur HD and only tried Merkur blades so far. First pass WTG generally ok but tried second pass ATG yesterday (after re soaping) which left sore skin and small blood spots on chin and neck – ouch. What blade should I try next? Also, maybe I should stick to one pass, but I would like to do at least two to get a pretty close shave. Would value advice please. Ps; this blog facility is great.”
Take time, focus on basic technique, and enjoy the process, says Aaron
AARON SAYS
“Mr. James,
I would first make sure that you are developing your lather correctly, have a good blade angle (it should be about 30 degrees), and preparing your beard well by either showering or a hot towel.
Next I would say that since you are new to shaving with a single edge razor don’t shave against the grain. At the most right now go across, or perpendicular, to the beard growth. You may also take a second pass with the grain too, to increase the closeness of the shave. Shaving against the grain is a little bit advanced, and some say unnecessary, although it is something I practice for a close shave.
If you are looking to change the blades, I recommend the Israeli made blades, Astras, Derby, Lord, Sharks, and Wilkinson-Sword blades. I don’t recommend Feather blades until you are more comfortable with your shaving technique, they are incredibly sharp and unforgiving of mistakes.
I realize this is a lot of information at once. Take time, focus on basic technique, and enjoy the process! Soon you will be shaving easily and nick-free in no time.
Smooth Shaving!
Aaron”
Do you have any burning questions you would like ask our wet shaving expert Aaron Wolfenbarger?
CLICK HERE TO ASK AARON YOUR QUESTION
Ask Aaron Q/A: Palm stropping & corking of razor blades
Aaron is asked a question about double edge razor blade harshness
Grant Letham, from the UK, asks:
“Hi, I’m enjoying my double edge shaving experience with my Edwin Jagger D89. Currently using routine of shower, King of Shaves shaving oil, lather – proraso or arko, 2 pass shave – 1 with and 1 across grain, cold water rinse and then moisturiser. I’m finding the first shave with a fresh blade can be risky in terms of nicks and cuts. Any clues as to how I can minimise / avoid this?”

AARON SAYS
“Mr. Letham,
I too experience new blade harshness occasionally. I have heard this can be due to tiny burrs left over from the manufacturing process. There are two methods I would recommend trying: corking and palm stropping.
For corking, take a natural cork stopper from a wine bottle, and run the blade edge into the cor gently two or three times.
For palm stopping, grasp the blade in the middle and rub the blade away from the edge on the thick of your palm. This can be a little bit tricky, so watch the following video tutorial to see exactly what I mean: http://www.youtube.com/watch?v=Ogq4wfpT7hc. This should help with those new blade blues!
Smooth Shaving!
Aaron”
Do you have any burning questions you would like ask our wet shaving expert Aaron Wolfenbarger?
CLICK HERE TO ASK AARON YOUR QUESTION
Ask Aaron Q/A: Redness around the mouth
Aaron is asked a question about skin irritation and redness around the mouth
John Ramsay, from the UK, asks:
“Hi, I just bought the osma alum bloc and started to use it after shaving. I started by wetting the block and applying it to my face, I let it set in for a minute and then rinsed off, then applied some aftershave lotion. But there was still redness around my mouth -am I doing something wrong?”
AARON SAYS
“Mr. Ramsey,
The redness around your mouth could be a variety of things. It coud be irritation from the block, or shaving irritation. The mouth area tends to be one of the hardest areas to shave. I would pay special attention to the angle of your razor, rub on the alum block then immediately wash off, and be sure to use a good moisturizing balm. If you continue to experience redness, reply below and we’l try to troubleshoot some more! I hope this helps and gives you some relief.
Smooth Shaving!
Aaron”
Do you have any burning questions you would like ask our wet shaving expert Aaron Wolfenbarger?
CLICK HERE TO ASK AARON YOUR QUESTION
Ask Aaron Q/A: Cold Weather Shaving & Moisturising The Skin
Aaron is asked a question about skin irritation (after shaving) during the cold weather & what can be done to alleviate the problem
Jorge Flores, from Mexico, asks:
“Dear Aaron. I’m from Chiapas, Mexico, and frequently have to travel around my country, but the weather in the cities can be very different. It’s either very, very, very hot or very, very, very cold, so my question is this: When I have to shave in the cold weather my skin becomes very irritated and I don’t know if there is a product on the market that exists to help overcome this problem. I appreciate your answer.”
AARON SAYS
“Senor Flores,
The irritation you are experiencing is probably due to dryness from shaving and the cold, dry air. The product I would suggest to help is an aftershave balm such as the Blubeards Revenge balm or one of many others, and if you still continue to experience discomfort, a moisturizer such as the Men-U moisturizer.
Both shaving and dry air can rob the skin from moisture and you want to add and keep moisture in be using a balm and/or a moisturizer to combat the discomfort. Let me know if you continue to have trouble but using these products should alleviate the problem!
Happy Shaving!
Aaron”
Do you have any burning questions you would like ask our wet shaving expert Aaron Wolfenbarger?
CLICK HERE TO ASK AARON YOUR QUESTION
Ask Aaron Q/A: Styptic Pencil vs Alum Block
Aaron is asked a question about the advantages of using an alum block over a styptic pencil
Michael Behan, from the UK, asks:
“Like lots of shavers, if/when I get a small cut or nick whilst shaving, a styptic pencil will stem the bleed. What advantage is there in using an alum block, which costs twice as much as a styptic pencil?”
AARON SAYS
“Mr. Behan,
While they styptic pencil and the alum block both take care of nicks, the basic purpose is different. Most people use the alum block as part of an aftershave routine, and the styptic pencil is a spot treatment. I hope this helps!
Happy Shaving,
Aaron”
Do you have any burning questions you would like ask our wet shaving expert Aaron Wolfenbarger?
CLICK HERE TO ASK AARON YOUR QUESTION
Ask Aaron Q/A: Double edge safety razor blades: Stainless Steel vs Platinum
Aaron is asked a question about the differences between stainless steel & platinum double edge razor blades
Jon Strutt, from the UK, asks:
“I’m thinking of buying some Astra double edge razor blades – what are the pro’s and cons of the Stainless Steel vs Platinum?”
Made in Egypt, the PTFE coated Shark Super Stainless is a favourite to rival the mighty Feather in the double edge shaving world.
AARON SAYS
“Mr. Strutt,
Blades are the most subjective and personable part of shaving, so please take whatever advice given as a personal anecdote. For starters, the main difference is the material and coating treatments that the blades receive. As to how it feels on the face, for me the Platinum blades were smoother and sharper than the Stainless. However, that experience can vary from person to person. I encourage you to try both and see which feels the best to you.
Smooth Shaving!
Aaron”
Do you have any burning questions you would like ask our wet shaving expert Aaron Wolfenbarger?
CLICK HERE TO ASK AARON YOUR QUESTION
Ask Aaron Q/A: Differences between a multi-bladed cartridge razor, a cut throat & safety razor
Aaron is asked a question about the differences between a multi-bladed cartridge razor, a cut throat & safety razor
Darren Collins, from the UK, asks:
“Hi Aaron, I’ve always used cartridge razors (5 blade Wilkinson Sword at the moment)…Is there much difference between a cut throat or safety razor and the system I use now? How easy is it to shave “properly”? Can you please recommend me a good quality razor (I have sensitive skin)?”
A safety razor like the Merkur Futur 761 Safety Razor will offer a far smoother shave than a multi bladed cartridge razor
AARON SAYS
“Mr. Collins,
I believe there to be a significant difference and improvement switching from a multi-blade cartridge system to a cut-throat or safety razor. The technique is different, but with a little time I think it is easy to master and achieve superior shaves.
I recommend the Bluebeard’s “Scimitar“, the Muhle 89, the EJ DE89, the Merkur 34c and Merkur 38c as all good introductory razors to begin. I also recommend investing in a shaving brush, and cream or soap to complete your shaving system. Welcome to the club!
Happy Shaving!
Aaron”
Do you have any burning questions you would like ask our wet shaving expert Aaron Wolfenbarger?


















